Honda Motorcycle and Offroad Suspension Set-up

1. General
Getting your suspension dialled in for your riding style is one of your first prioritys when you take your new bike out on the track. However, it is an on going process. What worked today might not suit the next track conditions you encounter next week. Therefore, you have to take on the role of test rider yourself and learn to identify problem areas. Never stop testing and thinking about what your bike is doing. Here are some practical tips for making your bike as good as it can be, stock or modified.

Spring Rates
There is again no way a manufacturer can know what you weigh. The average target weight for a full size motorcycle is a 75kg rider. Therefore, if you have a MX or current technology enduro bike, chances are the spring rates will be close for you. Of course, you will need to check and adjust your sag to be sure. There are some expectations. If you ride in sand or mud a lot, you might want to do heavier springs. Pro class riders on four strokes will go for stiffer rates, as will x-treme jumpers.

Clickers
Often I will call a client on Monday after a race to see how he (or she) went. Occasionally I am met with the response of it was too soft or it was to stiff my next question is What clicker position did you start out at and where did you end up? Did the adjustments you made help?

I DIDNT TOUCH THEM, I LEFT THEM RIGHT WHERE YOU PUT THEM Anyone who knows a suspension tuner will realise how much this drives them nuts. Please adjust your clickers yourself. One adjustment at a time so you know what it is doing. Keep a note of where you started form, so if you get lost you can go back. Read your owners manual, its full of good stuff. Here is some more information that may help both revalved and standard suspension.

Washing
Wash your bike after every ride so you can inspect the fork chrome tubes for knicks or scratches that will lead to seal failure. For upside down forks keep the chrome tubes free of dry mud that the dust scrapers will not be able to dislodge. For the shock, lift the bump stop up periodically with a screwdriver and wash under the bump stop. This is a common area where shock shaft corrosion starts. If the flap that protects the shock becomes damaged, replace it or the roost off the rear wheel will damage the shaft.

2- Fork Adjustments
Compression (C) clicker or adjuster is usually at the base of the fork; sometimes covered by a rubber plug, just flick it out with a screwdriver. (Compression clicker is on top for SHOWA twin chamber forks.

Rebound (R) is the top clicker for all forks other than twin chamber forks

Clickers, check the clicker settings are at the suggested positions. If in doubt, 10C and 10R is a good place to start. After riding, raise the front wheel off the ground and release the air that builds up in the forks.

Triple clamps; Wipe the clamps out with a solvent, they must be clean and oil free. Use a scotchbrite pad if you need to remove any hard deposits. Feel the steering head bearings while you are at it do they move freely?

Axle; Check the axle for any nicks or burrs. NEVER HIT YOU AXLE WITH ANYTHING HARDER THAN BRASS OR PLASTIC. If your axle cannot centre in the axle foot, you will have a harsh feeling fork that you cannot remedy with clicker adjustment. Install the forks and torque the triple clamps to manufacturers specification. Over tightening will cause binding in the upper tubes.

Set the fork projection through the top clamps to the stock position. If you have a projection preference and have not changed fork settings, set it to your previous figure. Lubricate the axle with thin oil or WD40, run it through the feet and wheel bearings to ensure it is smooth. Install the wheel and the axle, but leave the pinch bolts loose. After all the other assembly, work is done, drop the bike off the stand, hold on the front brake and pump the forks several times to centre the axle and the fork legs. Tighten the pinch bolts with the bike still sitting on the ground. THIS STEP IS CRITICAL.

The remainder of this article covers Fork tuning specifics, motorcycle suspension problem solving, suspension shock adjustments and shocking tuning. The full article can be obtained by contacting Teknik Racing owner Nick Dole through their website www.teknikracing.com.

Why Choose a Honda Motorcycle?
When you are looking for a great motorcycle, you may want to try the Honda motorcycle. You will get this good dependable and quality product many yea...

Are Thumpstar Pit Bikes Reliable?
There was a time when the only small sized motorcycles also now known as pit bikes were made by Japanese companies such as Honda and Kawasaki. In the ...

Honda Super Cub and 50cc Honda Cub - The Volkswagen Beetle of Motorcycles!
A very clever design: the Honda Super Cub was the combination of a moped and a scooter. It attracted many people due to its friendly and non intimidat...

My Goldwing Trike - Cured My Mid Life Crisis
Ok I'm in my mid fifties have never ridden a motorcycle since I was eighteen years old and I'm in the middle of a mid life crisis. Should I go for the...

Chopper Kits
There has been an absolutely phenomenal growth of interest in custom chopper motorcycles over the recent years. Also along with an increased price tag...

Motorcycling - Picking the Right Bike - Part III
Dirt bikes and motocross bikes have a lot in common, but the two styles address different goals. As always, consider the kind of riding you intend to ...

Honda Dirt Bikes - Everyone Wants A Honda
There are dirt bikes, and then there are Honda dirt bikes. A Honda represents speed, power and maneuverability (making it obvious why they are the top...

Dirt Bikes
Dirt bikes, also known as Trails Bikes are off-road, lightweight motorcycles built for cross country, unpaved, rough or uneven grounds. Since they are...

Basic Tips To Shop For Used Motorcycles
Generally, used motorcycles are taken in a negative means by calling them a poor quality vehicle. If you know few basics tips about such bikes about g...

Motorcycle Engine Variety
Motorcycle engine design and innovation has long surpassed that of the automotive industry, and industry observers agree that the big companies like Y...

Motorcycle Hitches
Motorcycle hitches are great for a wide variety of projects. You can tow almost anything behind a motorcycle, as along as it meets the weight require...

Custom Motorcycle Parts
The motorcycle is a two-wheeled vehicle that runs on an engine. It is made up of various components such as a chassis, fuel tanks, suspensions, engine...

Motorcycle Suspension Basic Set Up
Modern sporting motorcycles can come with a near dizzying array of suspension adjustability. Pre-load, compression damping, rebound, high-speed dampin...

Quality Harley Davidson Parts for One Great Machine
With the company that has built its name to become one of the most respected manufacturers of top quality motorcycles around the world, there is no do...

Motorcycle Trailer Hitches
If you are interested in turning your motorcycle into an all-in-one transportation vehicle, it is a good idea to purchase a motorcycle trailer. Befor...

This entry was posted on Sunday, August 3rd, 2008 at 9:01 pm and is filed under Motorcycle Articles . You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.